Access3 Bracket/Mount?

Home Forums Azulle Access 3 Access3 Bracket/Mount?

  • Author
    Posts
  • #28242

    AndrewK
    Participant

    Has anyone found a good bracket/mount/pocket for the Access 3?

    I hope to use the Access3 to replace Wyse boxes, and will need to somehow attach it to a monitor or mounting arm, or inside a dual VESA pocket between the two. It’s going to be in warm/hot environments, so double-sided tape or thermal tape by itself is not a viable option. Before I go down the road of a custom fabricated option, I’m curious if anyone has found a good mounting option, or has already commissioned a custom solution.

    Thanks in advance!

  • #28876

    AndrewK
    Participant

    Azulle has said that they are coming out with a simple mounting solution that should be available within a couple months.

    My needs are not so simple, so I had a custom mount made. For anyone interested, the company is BR Metal, based out of Menomonee Falls, WI, USA. Contact David Trojan at davet@brmetal.com or 800-249-5482.

    I am using the Access3 as a kitchen video controller for a POS system, and also needed the option to mount a bump bar. This solution includes a clip for the Access3 that can be attached using the mounting screws for a VESA 100 mount. It also has a plate that will sit between the monitor and any arm/mount with two threaded pegs welded to it. I’ll be using those pegs to mount the bump bar arm, but they could be used to attached signage, etc. The elements in the pictures in aqua/blue-green are what make up the mounting kit.

    116d734_iso2

    Assuming you do not need the mounting pegs, the clip could be used by itself, either connecting to a VESA 100 compatible monitor or mount, or even wall or under-counter mounted. As you can see, it allows access to all ports, and mobility of the antenna. Using this configuration on a HDMI monitor, the proximity to rear ports means the included M/F HDMI cable is sufficient for a video connection.

    This was recently designed, and I have yet to receive/test the mounting kit, but it looks to check all my boxes with a simple design.

    Attachments:
    You must be logged in to view attached files.

You must be logged in to reply to this topic.

Login here

Register here